So in no particular order, here you go:
10 - Ceiling fans and light fixtures - use a bendable duster to do this, you won't need a ladder (unless you have really high ceilings), you can bend to suit any light configuration (including a ceiling fan, just bend 90 degrees), and you can remove the cover and machine wash. I got this one at Wal Mart and it cost me under 8 bucks.
9 - Corners, moldings and door frames - spiderwebs and dust aplenty here. This area usually goes ignored, but here's the laziest, easiest way to do it. Grab a mop pole and old sport sock, flip the sock inside out and place over the end of the mop pole. Now, you've got an amazing high-duster! You can also use microfiber cloth secured around the pole with an elastic band.
8 - Walls - we get asked this a lot. I personally don't dust my walls, but if it is something that needs to be done, you can simply use a flat head mop (like a Swiffer) and use a Microfiber cloth sprayed with a bit of water. No need to use an expensive product here! Simply work the tool up and down the wall using a 'W' pattern to save time and energy and to ensure you are covering the entire space.
7 - Bathroom vents - these get super dusty - they run for a long time and suck up tons of dust. The next time you're cleaning, use your vacuum with brush attachment to suck up the dust. Now, your vents won't look like those of a mechanic's shop.
6 - Baseboards - revert to trick # 9, use a mop pole with a cloth or old sock attached to it, lightly sprayed. No more bending down, no more tough work. This makes the job so much easier and also allows you to access hard-to-reach areas like behind furniture.
5 - Delicate items - to clean ornaments, antique pieces, silk flowers or small delicate trinkets, lightly mist a small paintbrush and use that to do detailed dusting.
4 - Dust in the right direction - dust is like snow; it falls from the top to the bottom. So, when dusting, start with the highest items and work your way down to the lowest. If you don't, you'll have to repeat your work. Another good thing to keep in mind is to work in a spiral formation - working clockwise tackle all four corners and mouldings, then move down and dust all tops of frames, etc, lower again to dust all table tops and finally all baseboards. Then vacuum. Do you see how this allows no dust to fall on an already cleaned area?
3 - Use microfiber cloths - I've been spouting off about them for years. I can't understand why you would dust with anything else - it makes you spend more time cleaning! A microfiber cloth is electrostatically charged, meaning it literally attracts dust. It is also highly absorbent so it can last longer during your cleaning task. They won't leave lint or dust behind and leave surfaces streak-free.
2 - Clean your ducts every 5 years. That's a huge source of dust and allergens and if you have had renovations recently or have lived in the house after someone else has, this is the ultimate form of dusting. A vehicle will come by and vacuum your vents out, leaving no residual dust in the home environment due to dirty vents.
1 - To vacuum delicate areas or areas where you can't see, vacuum with a pantyhose covered dust brush. The nozzle can now collect dust while using a dust brush without running the risk of sucking up valuables or items you don't want vacuumed up!